Pipeliner II 609
Orbital Weld Head for Multi Pass GMAW/FCAW Pipe Welding
The Magnatech Pipeliner II is designed to make pipe-to-pipe and pipe-to-fitting welds. Interchangeable guide rings mount the head on the pipe, allowing a broad workpiece size range from 168 – 1524 mm (6”– 60”) and larger.
The Pipeliner II improves productivity by increasing duty cycle, reducing repair rates, and producing welds of consistent quality.
FLX-TRACK™
In addition to welding pipework, the Pipeliner is also used for ID and OD welding on larger tanks, vessels, and ductwork.
- Flexible track allows mounting on complex curved surfaces
- Standard 2.3m (7-1/2’) Track sections bolt together for longer lengths
- Magnetic or Vacuum attachment
PIPELINER mounted on Flx-Track in 3.3m (11 ft.) diameter stainless steel duct
Left -Optional Pendular Oscillator positioned for fillet welds
Right Optional Torch Angle Bracket for fillet and socket weld applications
Features
- Full Function Capability (Torch Rotation, Filler Wire Feed, Motorized Arc Gap Control, Electronic Oscillation)
- Broad Pipe Size Range with change of single component – the Guide Ring
- Water-Cooled Torch uses standard Expendables
Messages Tab
Pipeliner II 609
| Specifications | |||||
|---|---|---|---|---|---|
| Application | Pipe size – 168 mm (6.625”) and larger |
||||
| Pipe wall thickness – unlimited | |||||
| Flx-Track™ for welding on flat and curved surfaces | |||||
| OSCILLATION MODULE (LINEAR) | |||||
| Output rating | 0 – 51 mm (2”) | ||||
| Oscillation speed | 0 – 2540 mm/min. (100 ipm) | ||||
| Oscillation dwell | 0 – 1 second. Independently adjustable at both stroke endpoints | ||||
| Cross seam adjustment | ± 25 mm (1.0”) | ||||
| OSCILLATION MODULE (PENDULAR) Allows sockets/fillet welding |
|||||
Cross seam adjustment |
± 20 degrees | ||||
| Torch vertical motion module | Stroke: 66 mm (2.625”) (motorized) |
||||
| Speed: 1520 mm/min. (60 ipm) maximum | |||||
| Tractor module | Poly-Track® propulsion (patented) | ||||
| Speed capability | 0 – 762 mm/min. (30 ipm). Higher speed motors available | ||||
| Travel direction | Switch selectable (on head) | ||||
| Wire | Wire diameter: | 0.8 – 1.6 mm (0.03 – 0.62”) | |||
| Wire feed speed: | 0.5 – 22 m/min. (20 – 866 ipm) | ||||
| Wire spool size: | 15/16 kg (25/33 lbs) | ||||
| Water-cooled torch | Amperage capability: 300 amps continuous. Uses standard torch components | ||||
| Torch adjustment capability | Torch lead/lag adjustment: | ± 15 degrees (manual) | |||
| Torch tilt adjustment: | ± 10 degrees (manual) | ||||
| Angle bracket (optional): | ± 45 degrees (manual) | ||||
| Dimensions/weights | Axial Length A1 |
Minimum |
Overall Width |
Weight 3 |
|
 |
609 WFOF | 38.7cm (15.25”) | 24.8cm (9.75”) | 30.5cm (12”) | 9.8 kgs (21.5 lbs) |
| 609 WFPP | 37.5cm (14.75”) | 24.1cm (9.50”) | 41.3cm (16.25”) | 11.6 kgs (26.5 lbs) | |
| 609 WFOH | 66.7cm (26.25”) | 26.7cm (10.5”) | 36.8cm (14.5”) | 14.4 kgs (31.75 lbs) | |
| 1 Center of oscillation stroke 2 Center of vertical stroke 3 Weight without wire spool (WFOH). Includes 1.6 kg (3.5 lb.) of Torch Cable Weight (Partial) |
|||||